Hear Anything in the Soundbar

If the sound bar does not have DTS decoding, and we want to play BluRays with DTS tracks, we have no choice but to configure in the sound settings that it is the TV itself that does the decoding from DTS to PCM stereo. Otherwise, you will not hear anything in the soundbar.


The alternative is the opposite: use as a hub the sound bar instead of the TV. This can only be done with the best sound bars on the market, which usually bring several HDMI inputs with Pass-Through for the video signal, that is, the sound bar receives both audio and video signals, "stays" the audio to play and passes the video signal to the TV through HDMI.


This configuration is highly recommended if, for example, you have the TV mounted on the wall with some VESA support, since the HDMI ports of the TV are inaccessible. In this way, you connect all the A / V devices to the soundbar taking advantage of all the inputs you have, and using an HDMI cable you take advantage of the HDMI ARC output of the bar to send all the video signals connected to a single HDMI port. The TV.


This configuration is also essential to obtain Dolby Atmos and DTS: X sound when the TV does not have eARC, which are the vast majority of the models before 2018.


For this, we repeat that it is necessary that the soundbar has the function of Video Pass-Through. Also, if you have a device with 4K video, you have to make sure that the soundbar has Pass-Through for 4K, something that not all of them have. If one of the A / V devices also has HDR, the bar must also have HDR Pass-Through, which you will only see in high-end models such as the Samsung HW-MS650.


With this configuration, it is from the bar that alternates between the different video sources, receiving all from a single HDMI input on the TV. For example, you have the console in the HDMI 1 port of the bar, and you have the Chromecast in the HDMI 2 port of the bar. To see the content of each of them you will have to change HDMI with the remote control of the bar, but on the TV they will all appear in a single HDMI input.


And what about the sound of the television itself? Can not we play it in the sound bar? Of course yes. If you connect bar and TV through the HDMI ARC port of both devices, you will also receive audio from the TV at the bar. On the other hand, if your TV does not have HDMI ARC, you can use an optical cable from the TV to the bar, only for that sound that is typical of the TV.


These elongated devices are designed to be placed under, in front of or on top of the television. They contain two or more speakers, some also come with a separate subwoofer that produces the most severe wounds, and others bring it integrated into the same device.


Many users are not satisfied with the quality of sound that is given with television, and at the same time, feel lazy when having to think of buying different sound devices with cables that run throughout the living room.


The sound bars or soundbars can be the perfect solution to achieve better sound quality without having to install different devices throughout the room. You have to take into account how the soundbar will connect to your television. The most common method is to use an optical cable, also known as Toslink.


Most modern TVs support this type of connection, but it is something we recommend to check before buying a soundbar. Some soundbars also have an HDMI input, which will do the same paper as a Toslink connection.


Check also that this sound output can route all the audio from different connected devices such as Blu-ray, game consoles or the internal TV tuner. In this way, to be able to listen to audio coming from all your devices you will only need to connect a cable that goes to your soundbar.

Sound Bars can benefit your TV viewing experience

Most soundbars have other inputs, including a 3.5mm minijack and stereo-jack connectors. These take analog sources and allow you to play audio from almost any device, including smartphones and tablets.


However, if you prefer the convenience of playing music wirelessly from any mobile device, we recommend that you check that the soundbar has a Bluetooth connection.


Note that unless both your mobile device and the sound bar are compatible with aptX, the default codec within the A2DP standard, the sound quality will not be as good.


The subwoofer produces the deep bass that will allow you to fully enjoy the special effects of the movies, especially if they are active. Although for films in which dialogues predominate, subwoofers will hardly be necessary.


Subwoofers can be active or passive. Passive models do not have a built-in amplifier, so they do not require power, and they depend on an additional speaker to the sound bar.


Active subwoofers have their amplifier, so they require an external power supply. However, they can receive audio wirelessly so they can be placed away from the soundbar without having to rely on cables.


Do not look only at the amplifier power figure that is given by the brand of the product because, in the end, the power of the watts does not translate directly into the volume, the sensitivity of the speaker also depends on other factors.


If you are looking for a convincing sound effect, we recommend you to read different reviews about the speaker or sound bar in which you are interested instead of learning only the specifications given by the manufacturers of the product.


Do not confuse either '3D sound' or 'spatial sound' with surround sound. Some sound bars do use Dolby Virtual Speaker technology, while others use their terminology to try to define something similar to this technology.


If there is something that causes us a bit of disappointment when we buy a Full HD TV, it is that the audio has nothing to do with the very high image quality.


Of course, among the options, the ideal would be to have a series of speakers and subwoofers connected to an AV receiver, but we do not always have space in the house and the budget. Moreover, the large surround sound systems are too robust for a small house, and we end up bothering the neighbors.


The most logical solution is to buy a small sound either in the form of a bar or in the way of a base so that it is under the TV and at the same time hold it, thus providing us with excellent audio quality.


But when we decided to buy a sound bar, we discovered that it is difficult to determine which one to buy because there are too many options, most of them similar to each other. That's why we've prepared this article about the best Denon soundbar this year; the idea is to make your work more comfortable if you're making a comparison of sound bars.


The first thing to keep in mind when buying one of these practical audio devices is the size, how we have the television set and how much space we have left? It is assumed that these devices are designed to save space, but each model has different dimensions. In this opportunity, we will emphasize the necessary type of bars for the television, since they are efficient to be able to put under the tv and occupy almost no space at all.


These base speakers for the television have some measurements, so first we must measure the base of the TV, the idea is that the bottom of the TV rests entirely on the soundbar to be stable and firm.


Another important fact is the weight that resists the bar. A smart TV, ultra flat, full HD or 4K can weigh around 25 kilograms, and the bar should be able to support this weight, so we must take into account the importance of the TV and buy a bar that resists.


The brand is another feature that concerns us all. This time we want to refer to the Japanese electronics company Denon, which was founded in 1910 and has an excellent reputation worldwide in the development of digital audio systems. But let's see one of your speakers with the best score on the Internet.